Camera detection

After the camera installation on the board, it is possible to transmit live video to a computer through USB, checking the correct functioning of the components and the firmware.

What you need

• OpenMV IDE;

• Camera board;

• USB-C cable, with power and data lines;

Step 1: Test the camera

• After installing OpenMV IDE, connect the camera board with the USB-C cable to your computer and open the IDE;

• On the top navigation bar, click in "File", "Examples", "HelloWorld" and "helloworld.py";

• If the board was detected, on the bottom left corner, click in the image buttons "Connect" and then "Start". If not, a brief troubleshooting should appear to unbrick your board;

• After this, you should get live feed from your camera at the top right corner;